Netting falls into two main construction types — knotted and knotless — and the difference goes well beyond appearance. How a net is made affects its strength, how it behaves under load, how safe it is to work near, and how long it lasts. Here's what separates the two, and which one is right for different applications.
What is Knotted Netting?
Knotted netting is made by tying a knot at every point where two strands of twine cross, creating a grid of secured intersections. The twine itself is either twisted or braided before being fed into a netting machine, where each mesh is knotted individually — traditionally into a diamond pattern.
The knot is what holds the mesh open and keeps its shape. It's a well-established manufacturing method, which typically keeps knotted netting more cost-effective (when referring to larger mesh sizes) than knotless equivalents.

**Above: Boris Nets 50mm Knotted PP
Typical characteristics:
•Visible, raised knots at every mesh intersection
•Diamond-shaped mesh as standard
•Good abrasion resistance, as the knot itself absorbs a lot of the wear
•Can often be repaired on-site by re-tying damaged sections
•Widely used in polyethylene and nylon netting for bird control, cricket and golf perimeters, and general containment
What is Knotless Netting?
Knotless netting is produced by weaving or knitting continuous fibres together, so the intersections are locked in place through the weave itself rather than a tied knot. There's no raised knot at any junction — just a smooth, continuous surface.

*Above: Boris Nets 50mm Knotless PP
Typical characteristics:
•Smooth, uniform surface with no raised knots
•More consistent mesh spacing, since weaving is more precise than hand- or machine-tying
•Reduced abrasion risk to whatever the net comes into contact with — fish, skin, delicate cargo
•No knots to work loose, tighten permanently under load, or create localised weak points
•Usually a higher-tenacity, more consistent product, which is reflected in a higher price point
Knotted vs Knotless: Key Differences at a Glance
| Knotted | Knotless | |
|---|---|---|
| Construction | Twine tied at each intersection by knots | Mesh formed without traditional tied knots |
| Surface Texture | Raised knots | Generally smoother, uniform |
| Mesh consistency | Dependant upon knot type and manufacturing | Often uniform in manufactured knitted constructions |
| Abrasion on contents | Knots may cause additional rubbing at contact points | Smoother surface can reduce rubbing against fish or other contents |
| Repair | May allow individual mesh repairs | May require specialist stitching or patch repairs |
| Typical cost | Varies by material, mesh, size and specification | Varies by material, mesh, size and specification |
| Strength | Dependant upon material, twine and knot efficiency | Dependant on material and construction; avoid strength loss at traditional knots |
| Common uses | Fishing, bird control, containment | Aquaculture safety netting, sports, cargo protection |
Which Is Stronger: Knotted or Knotless Netting?
Neither knotted nor knotless netting is automatically stronger in every application.
The strength of a finished net depends on several factors, including the fibre material, twine diameter, mesh size, manufacturing method and the way loads are distributed through the net.
Traditional knots can introduce localised stress concentrations and reduce the effective breaking strength of the twine. Knotless constructions avoid these conventional knot points and can offer an improved strength-to-weight ratio in certain applications.
However, this does not mean every knotless net is stronger than every knotted alternative. The correct comparison should always be based on the specifications and tested performance of the finished netting product.
Which Type Is Used for Safety Netting?
Fall arrest safety nets are specially designed to absorb energy and reduce the consequences of a fall from height.
Under BS EN 1263-1, compliant safety nets can be manufactured using either knotted or knotless mesh constructions, provided they meet the relevant performance requirements.
Knotless netting is commonly used in modern fall arrest systems. Its relatively smooth surface can reduce the risk of injuries caused by contact with raised knots, while its construction allows it to deform and absorb energy during an impact.
Knotted safety nets can also provide effective fall protection, although the knots may tighten under impact, affecting how the net behaves after loading.
Regardless of construction, safety nets must meet the applicable standards and be correctly installed, inspected and maintained. A net that has arrested a fall must be taken out of use pending assessment by a competent person, with replacement generally recommended in accordance with FASET guidance.
Which Type is Used in Aquaculture?
In fish farming and commercial fishing, knotless netting is generally preferred wherever fish welfare is a priority. The smooth surface reduces scale damage, abrasion and stress on fish during containment or capture, compared to the rougher surface of a knotted net. Knotted nets remain common and durable in rougher, higher-wear conditions such as seine and trawl work, where their resistance to abrasion from repeated handling is an advantage.
Which Type is Used for Cargo, Bird Control and Sports Netting?
•Cargo & transport netting: Knotless polypropylene and nylon constructions are common where a smooth, snag-free surface helps protect the load being contained.
•Bird control netting: Both types are used; knotted polyethylene is common for cost-effective, heavy-duty deterrent netting, while knotless UHMWPE/HDPE options offer a lower-visibility, smoother finish.
•Sports netting: Both knotted and knotless constructions are used for applications including golf, cricket, football and indoor sports facilities. Selection depends on factors such as ball impact, mesh size, material durability, exposure to weather and the intended installation.
Choosing the Right Netting for Your Application
Both knotted and knotless netting have their advantages, and neither is automatically the best choice for every application.
The most suitable construction will depend on how the netting is intended to perform, the conditions it will be exposed to, and the required strength, durability and mesh characteristics.
At Boris Nets, we manufacture and supply specialist netting for a wide range of applications, including aquaculture, fall arrest safety systems, bird control, sports facilities and industrial containment.
With decades of net manufacturing experience, our team can help you select the right materials, mesh sizes and construction for your requirements.
Contact Boris Nets to discuss your netting requirements and find the right solution for your application.